TSP #266 - Agilent 6GHz MXG Vector Signal Generator (N5182A) Teardown, Repair & Frac-N PLL Analysis
In this episode Shahriar repairs an Agilent N5182A MXG Vector Signal Generator. The instrument produces the correct output signal for some set frequencies but reports a Fractional-N Unlock error for others while the output signal completely disappears. The instrument also fails many self-test checks.
The block diagram of the unit is described in details with a measurement strategy to analyze every element of the PLL loop. The band-pass filter banks are isolated and measured with a Siglent network analyzer and are shown to be fully functional. The VCO output amplifiers & doubler are also fully functional and tested using a Siglent spectrum analyzer. The PLL loop is then “overwritten” and manually adjusting the VCO control voltage demonstrates that the oscillator can cover its entire designed tuning range. The fractional-N divider also appears functional for the appropriate input frequency ranges. Finally, although the GaAs phase detector appear functional, it is possible for such a component to slowly degrade where the phase detection gain changes significantly. This custom Agilent part is sourced from a donor board and the instrument now functions across all frequency ranges and passes all self-tests.
The phase noise performance of the unit is verified against the datasheet using an Agilent E5052B signal analyzer with cross-correlation capability.
Please consider supporting The Signal Path:
https://www.TheSignalPath.com/Donate
https://www.Patreon.com/TheSignalPath
Other links:
https://www.TheSignalPath.com
https://www.Twitter.com/TheSignalPath
Leave a Reply