Archive for February 21, 2015

Teardown, Analysis and Part-Salvage from an HP 70001A Series Optical Microwave Analyzer

In this episode Shahriar performs a teardown and analysis of several HP 70000A modules. The modules include a 20GHz optoelectronic converter, 2.9GHz tracking generator, 10MHz/100MHz precision reference and a 22GHz spectrum analyzer.

Along with the teardown of these modules several microwave components are recovered for future use including amplifiers, VGAs, mixers, photo detector and OCXOs. The 22GHz spectrum analyzer module is preserved since it is simply too beautiful to destroy.

Experiments and Teardown of the Teledyne LeCroy LabMaster 10-100zi 100GHz, 240GS/s Oscilloscope

In this world exclusive episode, Shahriar visits Teledyne LeCroy to take a close look at the operation, teardown and experiments with the LabMaster 10-100zi, 100GHz simultaneous bandwidth, 240GS/s real-time oscilloscope. This instrument provides either a single 100GHz channel, or two 33GHz and one 65GHz digitizing channels. The instrument uses a frequency interleaving technique invented and implemented at LeCroy.

The block diagram and the theory of operation of the scope is presented. This includes the architecture of the 4x80GS/s ADCs and the triple frequency interleaving system. The teardown of the scope includes a close look at the ADC platform, the dual frequency interleaving (65GHz operation) and the triple frequency interleaving (100GHz operation). The experiments with the scope demonstrate the instrument’s capability to digitize signals up 100GHz using the beat frequency of two non-coherent lasers. The scope is also used to capture a 4pS rise time pulse from a femtosecond laser pulse system and a high-speed photo detector.
A complete factory tour is also presented where Teledyne LeCroy assembles all their oscilloscope products right here in the USA.

Review and Teardown of the Analog Arts SL987 USB Oscilloscope AWG Pattern Generator and Logic Analyzer

In this episode Shahriar takes a close look at the Analog Arts USB based mixed-domain instrument. The SL987 offers an oscilloscope, arbitrary waveform generator, FFT-based spectrum analyzer, pattern generator and logic analyzer in a compact form factor.

The teardown of the unit is presented along with the datasheet of every major component on the PCB. Some design limitations and concerns are presented along with basic performance verifications.

My Interview at The Amp Hour!

I had a great time as a guest of The Amp Hour. We talked about everything from device physics to circuit design into the mm-wave frequencies and beyond. Although this interview took place a short while ago, I thought it would be beneficial to also have a link here at The Signal Path. Also, don’t forget to listen to the many great episodes of The Amp Hour. The link to my interview can be found here.

  • Social Media

  • Administrator

  • Archives